
Well inspection in Farmington and San Juan County
A well inspection tells you whether a private water system is in good working order and whether the water is safe to use. It is one of the most useful steps you can take when buying rural property, refinancing, or simply checking on an older well. We inspect wells for property owners, buyers, and real estate professionals in Farmington and the surrounding area.
Quick answers
How long does a well inspection take?
The site visit often takes a few hours, including the flow test. Lab results for water samples can take several days.
What water tests should I order?
Most inspections include bacteria and nitrates. Mineral tests and, in some parts of New Mexico, arsenic or uranium tests may also be recommended. Ask your inspector or a certified lab.
Do lenders require a well inspection?
Some lenders and loan programs require proof of water quantity and quality for homes on private wells. Check with your lender early in the process.
The full guide
Tap a topic to open it.
When to get a well inspected
- Buying or selling a home on a private well. Many buyers, and some lenders, want proof that the well produces enough water and that the water quality is acceptable.
- After years without service. If you do not know when the well was last checked, an inspection gives you a baseline.
- When something changes, such as a new taste or smell, cloudy water, lower pressure, or the pump running more often.
- After flooding or nearby construction, which can affect the wellhead and the water.
- Before adding demand, like a new addition, irrigation, or livestock.
What a well inspection usually includes
Inspections vary by company, so always ask what is included. A thorough inspection often covers:
- Wellhead and well cap. Checking that the cap is secure, vented, and sealed against insects and surface water, and that the casing extends above ground.
- Location and setbacks. Looking at the distance to septic systems, animal areas, and other possible contamination sources.
- Pump and electrical. Checking how the pump starts and runs, the pressure switch, control box, and wiring at the surface.
- Pressure tank. Confirming the tank holds its charge and the system cycles normally.
- Flow or yield test. Running water over a set period to measure how much the well can produce and whether it keeps up.
- Water quality sampling. Collecting samples for a lab. Common tests include coliform bacteria, nitrates, and minerals. Additional tests may be recommended depending on the area.
- Records review. Comparing what is on site with any available well records, including depth and construction details.
- Down-well camera inspection, offered by some companies, to look at the casing and screen for damage, buildup, or debris.
Water testing basics
A private well is not monitored by a utility, so the owner is responsible for knowing what is in the water. Groundwater in northwest New Mexico generally comes from sandstone aquifers, and mineral content varies from well to well. Typical testing includes:
- Total coliform and E. coli, which indicate whether bacteria could be getting into the water.
- Nitrates, which can come from septic systems, fertilizer, or animal waste.
- General minerals such as hardness, iron, manganese, sulfate, and total dissolved solids, which affect taste, staining, and appliance life.
- Other contaminants that may be suggested for parts of New Mexico, such as arsenic or uranium. Ask your inspector or a certified lab what makes sense for your location.
The New Mexico Environment Department provides information on private well testing and certified labs.
Inspections for home buyers and real estate agents
For a purchase, timing matters. Schedule the inspection early in the contingency period, because lab results can take several days. Ask for a written report that you can share with your lender and agent. If the inspection finds problems, the report helps you negotiate repairs or credits and plan for treatment.
Questions buyers often ask:
- How deep is the well, and when was it drilled?
- Is there a well record on file with the state?
- How old is the pump, and when was it last serviced?
- Does the well produce enough water for the household?
- Are there any water quality concerns, and what would treatment cost?
Camera inspections
A down-well camera lets a technician see inside the casing without pulling everything apart. It is useful for diagnosing sand problems, low yield, damaged casing, lost equipment, or mineral buildup on the screen. If an inspection or a flow test points to a problem inside the well, a camera inspection can help decide between cleaning, repair, or a replacement well.
After the inspection
Depending on what is found, next steps may include:
- Replacing a damaged well cap or improving drainage around the wellhead.
- Shock chlorination and retesting if bacteria were found.
- Repairing or replacing the pressure tank, switch, or pump.
- Installing water treatment, such as a softener, filter, or reverse osmosis system.
- Well rehabilitation or, in some cases, drilling a replacement well.
- Properly plugging an old, unused well, which New Mexico requires to be done correctly to protect groundwater.
Questions to ask before you book
- What exactly does your inspection include, and is lab testing part of the price?
- How long is the flow test?
- Which lab do you use, and how long do results take?
- Will I get a written report?
- What New Mexico license and insurance do you carry for well work?
How often should a well be checked?
Many well professionals suggest testing water quality at least once a year for bacteria, and checking the pump, pressure tank, and wellhead every few years or whenever something seems off. Keep a simple log of test results, service visits, and any changes you notice. Over time, that record makes it much easier to spot a slow decline in water quality or yield, and it is useful paperwork when you eventually sell the property.
Request a well inspection
Send us the property location, your timeline, and whether this is for a purchase. We'll follow up to schedule the inspection in Farmington or San Juan County.